Welcome to NSI-Sales.com
CUSTOMER SUPPORT 1-877-268-3700 | MON-FRI, 8AM-5PM CT
sdfgasgsdgsdfgsdfg

ESSLK-2/0 - PUSH ON GEL STUB SPLICE KIT

Easy-Splice

ESSLK-2/0

The Easy-Splice gel stub splice kit insulates, seals and protects stub splice connections up to 1,000 volts and are frequently used for street lighting connections. The specially formulated material provides excellent abrasion resistance, insulation value and UV resistance. In addition, the cap is clear to allow visual inspection of connector positioning during installation and connector performance during service life. The special three wire connector is perfect for street light connections. There are two ports that accept wires from #14 to 2/0 AWG (feeder cable). Use the single port that accepts #14 to #6 AWG to power the light. To install, simply push the cover down over the connection and snap the clamp closed. Corrosion protection is provided by the sealant gel.

CATALOG NO. NAED NO. CARTON QTY.  
ESSLK-2/0 16860 3