Welcome to NSI-Sales.com
CUSTOMER SUPPORT 1-877-268-3700 | MON-FRI, 8AM-5PM CT

IPLMD SERIES - POLARIS CONNECTORS - BLACK

Mounting Holes/Wire Entry From Either Side

IPLMD Series

IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Wire entry ports on both sides of the connector allow for access from either side. Supplied with removable access plugs to close the entry port not being used. The mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV rated. Will not support combustion. Cold temperature rated to -45°C. Dual rated for use with copper and/or aluminum cables. Rated 600 V, 90°C. Not recommended for fine-stranded, flexible wire. To receive the material in bags, add "-B" to the part number. Mounting holes will accept a 1/4" bolt for 3/0 AWG.

CATALOG NO. UPC CODE NO. OF PORTS WIRE RANGE (mcm) LENGTH (in) HEIGHT (in) WIDTH (in) HEX SIZE CARTON QTY.  
IPLMD 3/0-3 93221 3 3/0-6 3.85 2.00 1.82 1/4 3
IPLMD 3/0-4 93222 4 3/0-6 4.65 2.00 1.82 1/4 3
IPLMD 3/0-5 93223 5 3/0-6 5.45 2.00 1.82 1/4 2
IPLMD 3/0-6 93224 6 3/0-6 6.25 2.00 1.82 1/4 2
IPLMD 3/0-7 93225 7 3/0-6 7.05 2.00 1.82 1/4 2
IPLMD 3/0-8 93226 8 3/0-6 7.85 2.00 1.82 1/4 2
IPLMD 3/0-9 93227 9 3/0-6 8.60 2.00 1.82 1/4 2
IPLMD 3/0-10 93228 10 3/0-6 9.45 2.00 1.82 1/4 2
IPLMD 3/0-11 93229 11 3/0-6 10.25 2.00 1.82 1/4 1
IPLMD 3/0-12 93230 12 3/0-6 11.00 2.00 1.82 1/4 1
IPLMD 250-3 94301 3 250-6 4.59 2.13 2.31 5/16 2
IPLMD 250-4 94302 4 250-6 5.45 2.13 2.31 5/16 2
IPLMD 250-5 94303 5 250-6 6.31 2.13 2.31 5/16 2
IPLMD 250-6 94304 6 250-6 7.17 2.13 2.31 5/16 2
IPLMD 250-7 94305 7 250-6 8.03 2.13 2.31 5/16 2
IPLMD 250-8 96306 8 250-6 8.89 2.13 2.31 5/16 2
IPLMD 250-9 94307 9 250-6 9.76 2.13 2.31 5/16 2
IPLMD 250-10 94308 10 250-6 10.62 2.13 2.31 5/16 2
IPLMD 250-11 94309 11 250-6 11.48 2.13 2.31 5/16 1
IPLMD 250-12 94310 12 250-6 12.34 2.13 2.31 5/16 1
IPLMD 350-3 94401 3 350-6 5.12 2.44 2.50 5/16 2
IPLMD 350-4 94402 4 350-6 6.17 2.44 2.50 5/16 2
IPLMD 350-5 94403 5 350-6 7.22 2.44 2.50 5/16 2
IPLMD 350-6 94404 6 350-6 8.27 2.44 2.50 5/16 2
IPLMD 350-7 94405 7 350-6 9.32 2.44 2.50 5/16 2
IPLMD 350-8 94406 8 350-6 10.37 2.44 2.50 5/16 2
IPLMD 350-9 94407 9 350-6 11.42 2.44 2.50 5/16 2
IPLMD 350-10 94408 10 350-6 12.47 2.44 2.50 5/16 1
IPLMD 350-11 94409 11 350-6 13.52 2.44 2.50 5/16 1
IPLMD 350-12 94410 12 350-6 14.57 2.44 2.50 5/16 1
IPLMD 500-3 94501 3 500-4 5.61 2.94 2.81 5/16 2
IPLMD 500-4 94502 4 500-4 6.76 2.94 2.81 5/16 2
IPLMD 500-5 94503 5 500-4 7.83 2.94 2.81 5/16 2
IPLMD 500-6 94504 6 500-4 9.05 2.94 2.81 5/16 2
IPLMD 500-7 94505 7 500-4 10.19 2.94 2.81 5/16 2
IPLMD 500-8 94506 8 500-4 11.34 2.94 2.81 5/16 2
IPLMD 500-9 94507 9 500-4 12.48 2.94 2.81 5/16 2
IPLMD 500-10 94508 10 500-4 13.63 2.94 2.81 5/16 1
IPLMD 500-11 94509 11 500-4 14.77 2.94 2.81 5/16 1
IPLMD 500-12 94510 12 500-4 15.92 2.94 2.81 5/16 1
IPLMD 750-3 94601 3 750-250 6.50 3.50 3.50 3/8 1
IPLMD 750-4 94602 4 750-250 7.93 3.50 3.50 3/8 1
IPLMD 750-5 94603 5 750-250 9.35 3.50 3.50 3/8 1
IPLMD 750-6 94604 6 750-250 10.78 3.50 3.50 3/8 1
IPLMD 750-7 94605 7 750-250 12.20 3.50 3.50 3/8 1
IPLMD 750-8 94606 8 750-250 13.63 3.50 3.50 3/8 1
IPLMD 750-9 94607 9 750-250 15.05 3.50 3.50 3/8 1
IPLMD 750-10 94608 10 750-250 16.48 3.50 3.50 3/8 1
IPLMD 750-11 94609 11 750-250 17.90 3.50 3.50 3/8 1
IPLMD 750-11 94610 12 750-250 19.33 3.50 3.50 3/8 1